The Meaning of Health and Illness in the Mexican Culture Essay

The Meaning of Health and Illness in the Mexican Culture - Essay Example Without a doubt, health can be deeply understood in terms of a combination of biological, cultural and social factors slightly than with the sole purpose in biological terms. As it was stated above that the complete health image can be understood more deep by diverse of factors. No one can deny that the social influence on health is significant, where the better health and higher quality of life of community members depend on the level of their participation in the social networks, assistance to each other and overall change of the society to become more healthy and prosperous. Such social networks usually include the family, friends, neighbors, church, work, sport clubs and other social groups where people can exchange information, experience and advices. For Mexican people, health is seen as holistic issue or a unity between mind, spirit and body. In the West, the doctor hopes to "cure" a problem after people are unbearably sick, when they are in pain or feel physically disruptive symptoms. A traditional Mexican practitioner, by contrast, seeks to prevent disease by keeping all systems balanced and finely tuned throughout the patient's life span. Consultation with the practitioner of acupuncture is ideally an ongoing part of every patient's life. Although the idea of preventive medicine (for instance, prenatal care) is prominent in current discussions about revamping our medical care system, there is really no comparison to the prevention that is accomplished through acupuncture and herbs. illness also comes from a gradual blocking and deficiency of body energy. Mexican people see the body threatened by lifestyle factors such as overeating or overworking. We also look for disharmonies of the internal nature in intensely prolonged emo tional states such as grief or depression (LaVeist, 2005). Mexican culture and gender have their own influences on health care since the person's socioeconomic status, ethnicity, gender and other factors directly affect his/her perception of the disease, necessity or financial ability to seek appropriate treatment. It is obvious that those people who live in poverty or from low socioeconomic status receive less medical help than those with stable income and medical coverage. In multi-ethnical communities the doctors can influence the patients by learning and understanding the beliefs, attitudes and experiences of patients from different ethnical groups and nationalities. The influence of gender on health care can be observed while analyzing the female and male patients, their attitudes and behaviors, where men are usually direct and logical decision makers and women are less independent and more influenced by others (Chabram-Derners, Torre 2008). While some symptoms are obvious both for the person him/herself and others around (nervousness, physical dependence on alcohol or drugs, etc), other symptoms are rather difficult to recognize. Usually, people use schemas as the organized ways to look at things and people that influence person's expectations, behavior, etc. Certainly, to seek medical treatment is the responsibility of each drug-dependent person or those who surround him based on the perception of the severity of the addiction symptoms. Though, there are some factors that might positively influence treatment seeking, including belief systems, certain life activities, gender, SES and ethnicity. While the good patient role presumes that the person behaves well and properly by following the prescribed treatment and medical services, the role of bad

Worldview of William Shakespeare Essay Example for Free

Worldview of William Shakespeare Essay William Shakespeare was alive during a time that much differed from today. Back then, people were ranked in society by their gender, race or status. Today everyone is equal no matter what religion, gender, etc. We are all equal because we are all human beings. Even though Shakespeare was living during a different time, he still had a similar worldview that many of us share today. While reading Shakespeare’s plays, I at first found it difficult to figure out what his worldview was. I could not determine whether he was, in fact, Anti-Semitic although it was obvious that the majority of people were. However, many of the females he wrote about were extremely strong characters, especially for that time period.This brought me to the conclusion that he believed that men and women should have been equal. His worldview was that gender should not determine status, intelligence or anything else. For example, in his play, the Merchant of Venice, Portia was really strong and out-smarted many of the male characters. She dressed up in disguise and tricked a whole courtroom; Shakespeare wrote the play so that Portia was the one who then made the final decision. I agree with William’s worldview that women are able to be just as strong as men. I think that both men and women are capable of achieving the same amount of success in anything they do. In Shakespeare’s time, women were not allowed to act on stage so men played the female parts in his plays. My drama teacher in high school said that Shakespeare would have had women actresses in his plays if it were allowed. I admire William Shakespeare for so many reasons and this is only one of them. I was surprised when I found out that this was how he viewed the world.

Advertising Psycho Pharmaceuticals Essay -- Media Argumentative Persua

Advertising Psycho Pharmaceuticals I have been feeling a little overwhelmed lately, so I decide see my medical doctor to seek her advice on what I can do about my mental health. When I meet with her, she asks me if there have been any changes in my life that might explain my depression. Unfortunately, I cannot think of any particular cause for these feelings. My doctor suggests that I start taking a drug to help me overcome my unhappiness. She tells me that she can prescribe it right now if I want her to. It surprises me that she does not recommend therapy and instead offers a chemical cure. Since this is the first time I am seriously considering using a drug to "fix" my mood, I tell her that I will do some research and let her know my final decision. I do not know very much about antidepressant medications, so she gives me the names of a couple of popular drugs used to treat depression, Paxil(r) and Zoloft(r), to help me with my investigation. I feel the best place to start my inquiry is to look at the we bsites of the companies that produce these drugs. I figure that these sites will provide me with the information I need to make an informed decision on whether drug treatment, and which drug treatment, is right for me. I begin by looking at the website for Paxil(r), http://paxil.com. When the page loads, I am presented with a picture of a worried woman's face in profile in front of an orange-red background. When my eyes move away from this image, I am confronted with the question in big bold black letters, "Does this sound like you?" And this question is referring to the other statements flashing on and off of the screen slowly, statements about being tense, worrying, having anxiety, ... ...er than the Zoloft(r) site, such as the page on the site that discusses the importance of "talk" therapy for helping to cure patients with these disorders. Also, in the prescription information there is an explicit summary of how effective this drug has been for other patients. Overall, neither of these websites gave me a complete view of these medications. I understand now that the companies are trying to sell their product, but at the same time I value my safety while I am taking the medication. I will have to talk to my doctor and seek more extensive information from other medical websites before I have enough knowledge to decide if drug therapy is right for me. Works Cited "Paxil Paroxetine HCl." 2001. GlaxoSmithKline. 7 Oct 2001. http://paxil.com/ "Zoloft (sertraline HCl)." 2001. Pfizer Inc. 7 Oct 2001. http://www.zoloft.com/

Essay --

Rachel Reed PHIL 389 Saint-Croix 10 February 2014 Question #7: Descartes’ Foundationalism In this paper I will describe the foundationalist structure of Descartes’ arguments in his work Meditations on First Philosophy. Foundationalism is the view that there are some beliefs are epistemologically basic and can be known without knowing anything else is true (Loeb, Lecture 1-14). For example, philosophers such as Descartes would acknowledge that geometric truths, such as 2 + 2 = 4, are so fundamental that they don’t need to be proven through argumentation. Thus, these truths can provide the basic foundation for further arguments. In my paper, I will show that two foundational claims of Descartes are first, the existence of the mind, and second, the existence of God. From these claims Descartes derives many others, including the argument for material objects and souls. As I lay out Descartes’ case, I will examine the philosophical soundness and validity of his foundationalist account, as well as its merits and potential weaknesses. In the end, I will conc lude that Descartes’ foundationalism, while alluring in its simplicity, does not survive deeper investigation. Descartes’ first foundational argument asserts that one can have knowledge of one’s own existence. The claim is essential to many arguments that follow because it survives his â€Å"Deceiver Hypothesis.† This hypothesis states that â€Å"there may be a powerful deceiver of supreme power who is deliberately and constantly deceiving me† (Med III, p. 17). This demonstrates that we cannot know, or be sure of, anything based on sensory experience alone. However, Descartes supports the idea that some things can be known entirely outside of sensory experience; through the use of logic and re... ...undational premises, such as the existence of God and the mind, do not provide indisputable groundwork for Descartes’ argument. First begging the question to prove the existence of the mind via dualism, and then conflating logic with cultural and personal ideals, these two tenets cannot stand on their own. In the case of Descartes’ Meditations on First Philosophy, foundationalism does not endure close scrutiny. Grade: B- General comments: Your paper doesn't really address the prompt. It does not discuss arguments that might be offered in favor of Foundationalism or discuss how effective such arguments might be, nor does it address the question of what arguments Descartes does offer. There's also little in the way of focused discussion of what you take to be the problem with the position. It seems like you started on a different prompt and switched part-way through.

A Business Plan on Unique Furniture in Bd

Yes, We are Unique Prepared by: Desperate PREPARED FOR Mr. Md. Bodiruzzaman Guest Lecturer Department of Business Administration Dhaka City College, Dhaka PREPARED BY Group Name: Desperate Batch : XI , Section : A Dhaka City College, Dhaka. DATE OF SUBMISSION November 29 2012 Group Information Group Name: Desperate List of Group Members: SerialNo. | Full Name| ID| 01| Abu-Bakar-Siddique| 13| 02| Md. Shohel Perves| 15| 03| Md. Nasim Miah| 35| 04| Md. Rakibul Alam| 57| Letter of Transmittal To Mr. Md. Bodiruzzaman Lecturer Department of Business Administration Dhaka City College, DhakaSubject: To submit the â€Å"A Comprehensive Business Plan on Paper made furniture† Sir, We respectfully state that you have assigned us to write the â€Å"A Comprehensive Business Plan on Paper made furniture†. To prepare this report we have given our best effort. However, as we are student and still in learning process there may have some lacking, limitations and errors in this report. We are very much grateful to you for giving us the opportunity to find out and gain knowledge on this aspect of â€Å"Paper made Furniture† in Bangladesh. Preparing this assignment is an experience for us which helps us in our practical life.We would like to thank you for providing us with such opportunity. Sincerely yours, (Md. Shohel Perves) On behalf of Group: â€Å"Desperate† Student declaration We are declaring that the report on the topic of â€Å"A Comprehensive Business Plan on Paper made furniture† has only been prepared for the partial fulfillment of the course requirement of Entrepreneural Development. Executive Summary Unique Furniture is the biggest private furniture produce centre in Bangladesh. Unique Furniture understands people’s need best and will create and deliver appropriate product services to improve people’s life and make it easier.The ingredients of the Unique Furniture are basically paper and barley. We are not only the produ cer of furniture but also the provider of better service to the furniture. Unique furniture is doing its best to fulfill the wishes of people. Unique furniture has 5 promoters who will promote this business. These owners are highly qualified and experienced. Unique furniture is completely a private company and promoters are solvent enough. But this solvency is not enough for our business. So our 60% capital is external and 40% capital is internal. Unique furniture follows strict rules always. We are liable to provide quality products.To make a marketing plan first of all unique furniture had to look on the current market situation, products, competitors etc. Moreover unique furniture has allocated enough money for advertising and public relation. Financial Plan is one of the main portions of our business. These are mainly technical terms of sales, means of financing, profitability projection etc. The initial cost of project is maximum as per the total cost of project concern which i s Tk. 403,55,00,000. In the term of estimates of sales, its accessories price is like present selling price. We have also some labor and rent costs.Unique furniture target of profit mark – up is 30%. Unique furniture will make profit Tk. 111,04,12,919 after 5 years. We hope after this time our company will be the best private furniture producing company in Bangladesh. In our country there are many kinds of furniture available in the market. But all are not good quality. On the other hand some are very good quality in the market, but there price is high. So we launched new unique furniture which is made by paper. This is high quality and also reasonable price. We are sure if unique furniture comes in the market people will willingly take it and they will be benefited.Acknowledgement First of all we would like to thank the Almighty for giving us strength and the aptitude to complete this report. This report is far from complete perfection, but it could not be accomplished witho ut the unity of our team members. We have collected a lot of information from internet and visited many companies. Anything humanly created in the world is not completely perfect and we are no exception. We apologize if there is any error in this report. Table of Content Chapters| Subjects| Page No. | Part 1| Prefatory Parts| 11-12| | 1. 1| Introduction| 11| | 1. 2| Objectives of the Report| 11| | 1. 3| Methodology| 11-12|Part 2| Business Description Segment| 12-15| | 2. 1| General Description of the venture| 12| | 2. 2| Vision| 12| | 2. 3| Mission| 12| | 2. 4| Objectives of the company| 13| | 2. 5| Board of Directors| 13| | 2. 5. 1| Status and Shareholding Percentage| 14| | 2. 6| Management Team| 14| | 2. 7| Organization Structure| 15| Part 3| Marketing Plan| 16-26| | 3. 1| Current Scenario in Bangladesh| 16| | 3. 2| Current market situation| 16| | 3. 3| Marketing department| 17| | 3. 4| Sales department| 17| | 3. 5| Financial department| 17| | 3. 6| HR department| 18| | 3. 7| SWOT Analysis| 18-20| | 3. 8| Competitor Analysis| 21| | 3. | STP Analysis| 21| | 3. 9. 1| Market Segmentation| 22| | 3. 9. 2| Target Market| 22| | 3. 9. 3| Market Positioning| 22| | 3. 10| Marketing Mix Analysis| 23| | 3. 10. 1| Product Identification| 23| | 3. 10. 2| Pricing| 23| | 3. 10. 3| Promotion| 23| | 3. 10. 4| place| 23| | 3. 11| Brand awareness| 24| | 3. 12| Selling and Advertising| 24| | 3. 13| Research analysis| 24-26| | 3. 14| Corporate social responsibility| 26| Part 4| Financial Analysis| 27-35| | 4. 1| Cost of Project| 27| | 4. 2| Financial Plan and Loan Requirement| 28| | 4. 3| Means of Financing| 29| | 4. 4| Working Capital Requirement and Its Financing| 30| | 4. | Cost of Project Calculation| 31| | 4. 6| Income Statement (One Year)| 32| | 4. 7| Projected Income Statement| 33-34| | 4. 8| Cash Flow Statement| 34| | 4. 9| Balance Sheet| 35| Part 5| Location Analysis| 36| | 5. 1| Location Description| 36| Part 6| Risk Analysis| 37| | 6. 1| Risks & Remedies| 37| | 6. 1. 1 | Risks| 37| | 6. 1. 2| Remedies| 37| Part 7| Conclusion| 38-40| | 7. 1| Conclusion| 38| | 7. 2| Recommendation| 39| | 7. 3| Bibliography| 39| | 7. 3. 1| Reference of Books| 39| | 7. 3. 2| Reference of Web-Sites| 39| | 7. 3. 3| Product samples| 40| Part 1| Prefatory Parts| 1. 1 IntroductionBefore starting our journey we want to give you some information of the current situation of furniture sector in Bangladesh. If we see the last year statistics which is provided by Statistic Bureau of Bangladesh that, we can say one company called Otobi. Unique Furniture understands people’s need best and will create and deliver appropriate product services to improve people’s life and make it easier. The ingredients of the Unique Furniture are basically paper and barley. 1. 2 Objectives of the Study * To make the use of paper made furniture popular. * To provide brief information about our company and services. To analyze the sections of the project as example: Marketing, Finance et c. * To start a pilot project from the village named â€Å"Dendabor† at Savar 1. 3 Methodology To organize this report we selected some primary and secondary data sources. To gather the prime information we had to prepare questionnaires and also had to visit the organizations to obtain information through oral interviews. This report has been prepared by preserving following steps: * At first we represented the theoretical and historical perspective of the report. * We collected a lot of information from the external reports and internet. Then we take help from our teachers and the students of previous batches. * We took authorization to visit a company and lastly we have visited it. * We got different kind of information through oral interviews. * As a final point we delivered our recommendation Part 2| Business Description Segment| 2. 1 General Description of the Venture (Product or Service) We are going for launch a production of equipments that can produce furniture from the paper. We will also open Home service those will provide services to our customers. Customers' satisfaction is our main objective. 2. 2 VisionWe are the new furniture solution provider in Bangladesh achieving our business vision through growth in market reach, increasing operation size, international distribution, total service and consistent branding activities by the being most customers focused ; Innovative, cost effective ; efficient, environmentally responsible ; quality concerned company in the business. 2. 3 Mission To be the most consumer-focused, competitive, efficient, innovative, and environmentally responsible and quality concerned leading market oriented furniture manufacturer, sales and distributor of Bangladesh by the year 2014. . 4 Objectives of the Company * Generate and provide reasonably priced furniture to our customers. * Efficient utilization of Capital, Machineries, Material and Human Resources. * Continuous improvement of customer satisfaction and resourc e management. * Produce low cost furniture. 2. 5 Board of Directors Md. Rejaul Karim Vice-Chairman Md. Foysal Director Md. Abdul Aziz Chairman Md. Asikollah Supervisor Md. Yeasin Director Shahjada Yeasir Arafat Shuvo Supervisor Farzana Amin Director Md. Rafiqul Islam Supervisor 2. 5. 1 Status and Shareholding Percentage Name| Status| Shareholding Percentage|Md. Abdul Aziz| Chairman| 25%| Md. Rejaul Karim| Vice-Chairman| 15%| Md. Foysal | Director| 15%| Md. Yeasin| Director| 15%| Farzana Amin| Director| 15%| Shahjada Yeasir Arafat | Supervisor| 05%| Md. Asikollah| Supervisor| 05%| Md. Rafiqul Islam| Supervisor| 05%| | Total| 100%| 2. 6 Management Team Md. Abdul Aziz Chairman Md. Rejaul Karim Vice-Chairman Farzana Amin Director (HRM) Md. Yeasin Director (Marketing) Md. Foysal Director (Finance) 2. 7 Organization Structure Office Staffs (40 People) Share Holders Board of Directors Managing Director General Manager Secretary Sales ManagerProduction Manager Purchase Manager Production as sociating Staffs (5 people) Sales associating Staffs (5 people) Purchase associating Staffs (5 people) Sales Executives (3 people) Purchase Executives (3 people) Salesman (36 people) Salesman (36 people) Super visors (5 people) Salesman (1000 people) Part 3| Marketing Plan| 3. 1. Current Scenario in Bangladesh Bangladesh is a developing country. Most of the people wanted to decorate their house with furniture. But they can’t properly decorate their house because of high priced furniture’s which are already existed in Bangladesh.So we have a plan to produce furniture from papers which will be lower priced than the other furniture’s. Now people are thinking Unique furniture, people are thinking about how to save money. Now has become a primary need of our customer. So we want to create something new for our business plan and that can also help our society. Some companies like Otobi, Hatil, Pertax are providing the facilities of producing furniture from the wood. B ut the advantage cannot reach to the people of rural areas. Based on this positive information we are planning to make a project of producing furniture from papers.We hope it will get a good market inside our country. Unique furniture will produce huge quantity of furniture that will meet the need of our country. 3. 2 Current market situation Present situation of furniture is high priced. Increasing price of furniture has become common word now. We have a plan to provide furniture all over the country but middle and upper middle class are our target customers. Some companies are providing facility, but it is less than the demand. Present situation is perfect for this business. Paper made furniture is quite new idea, but we will introduce this to the rural and urban people.We think people will appreciate it and their hope is our inspiration. 3. 3 Marketing Department: Marketing department reports to Sales and works closely with the business line heads, the product development team an d Customer Service team globally. The role involves a high level of market sizing and data analysis projects with the objectives of identifying opportunities and risks and forming strategic recommendations to senior management and ideas to satisfy the economic. Here are also some objectives of our marketing department- * Focus on capacity optimization and assigning capacity to potential customer to ensure the highest revenue. Credit monitor, notify customer and ensure superior services delivery to our customer. * To develop mutual business benefits. * Co-ordinate with other departments (i. e. Technical, Billing and Finance) to maintain smooth operation. 3. 4 Sales department: Our sales department has some different objectives. The objectives of our sales department are given below: * To achieve sales target. * To ensure overall success and customer satisfaction. * Develop new market segments and expand the existing market. 3. 5 Financial Department:Finance department function in our Unique Furniture are being the budgeting and forecasting investment decision making ; raising and allocation fund. * To handle companies TAX ; VAT issues. * Finalize of the statement of income ; expenditure. 3. 6 HR Department: The objectives of HR department are * Conduct recruitment ; selection process by using external /internal sourcing channels and deliver resources on time as per plan though following all stages. * Handle contract renewal management. * Keep ; update all personal files of expatriates ; local employees. 3. 7 SWOT Analysis SWOT Analysis Strengths OpportunitiesWeaknesses Threats The following is a SWOT analysis as it applies to the Unique Furniture: Strengths: 1. Sell reasonable and quality products 2. Long durability of the Furniture’s 3. Fulfill with modern furniture’s. Weaknesses: 1. Lack age of advertisement 2. Lacking of relation with customers 3. New idea Opportunities: 1. Use of all types of papers. 2. Creating more job opportunity 3. Rapid i ndustrialization and urbanization 4. Increasing living standards of rural areas. 5. Be a number one brand in furniture sector 6. Providing quality furniture all over the country. Threats: 1. Will be highly competitive market 2. Change of environment 3.Achieving people faith. MarketingParticulars | Performance| Importance| | MajorStrength| MinorStrength| Neutral| MinorStrength| MajorStrength| High| Mid| Low| 1. Companyreputation| Yes| | | | | v| | | 2. Marketshare| | Yes| | | | v| | | 3. Customersatisfaction| Yes| | | | | v| | | 4. Productquality| Yes| | | | | v| | | 5. Servicequality| Yes| | | | | v| | | 6. Pricingeffectiveness| Yes| | | | | v| | | 7. Promotioneffectiveness| Yes| | | | | v| | | 8. Distributioneffectiveness| | Yes| | | | v| | | 9. Sales forceeffectiveness| Yes| | | | | v| | | 10. Innovationeffectiveness| Yes| | | | | v| | | 11. Geographicalcoverage| | Yes| | | | v| | | 2. Customerretention| Yes| | | | | v| | | SWOT analysis table:This SWOT analysis is apply for Uniqu e furniture: We have an opportunity to create good position and reputation in market. It is only possible when we can solve our all problems and give more attention on our job. 3. 8 Competitor Analysis Furniture business in Bangladesh is highly competitive. As a new furniture company we have also some competitor. They are 1. Otobi furniture 2. Partex furniture 3. Talukdar farniture 4. Hatil furniture and so on. First competitor for unique furniture is Otobi furniture. Which is leading furniture company in Bangladesh.To become a leading company in Bangladesh we have to compete with these existed furniture company. 3. 9 STP Analysis Marketing strategies: The entire marketing process: 3. 9. 1 Market Segmentation Three types of people live in our society upper class, middle class, and poor. So we also segment our product, price, and market into three groups. We think this marketing method will ideally work. Because different person have different status and parching power. Segmentation is the key to reach them. We segment our product for all kinds' people in our society. Here is our target market level: 1. Lower class 2.Lower middle class 3. Middle class 4. Upper class 3. 9. 2 Target Market Most of the people in our society are middle and upper middle class. So our first target is to catch the market of middle and upper middle class people. We will also provide our facilities to the rich people. After fulfilling their demand we will provide our business to the mills and factories. 3. 9. 3 Market Positioning Reputation of an institution depends on its quality. We give our first priority to the quality of product. Maintaining quality of product is the only way to achieve the faith of customers and their faith makes our position in the market. . 10 Marketing Mix Analysis 3. 10. 1 Product Identification Most of the equipment that can produce furniture from the papers will be made by us like sofa, chair, table, dining table, reading table, Corner set, book self etc. To produce furniture from papers we need some more products like paper, barley, color, frame, etc and we purchase this from other companies. 3. 10. 2 Pricing At first our target is to reach furniture to the middle and upper middle class customers, so our price should be low. After reaching to the target we fix our price based on market demand. 3. 10. 3 PromotionWe have a plan to make furniture which will make by papers. But now we are focus on our present activities to promote the productivity of furniture from papers. After promoting this we will focus on other matters. 3. 10. 4 Place â€Å"Place† means not just the locations of producer facilities, but the locations of all points of sale at which customers may have access to the product or service. That’s why we are going to set up our organization at Savar. We will serve our services to the rural areas of our country. 3. 11 Brand awareness Most people believe in brand. Because brand gives them warranty and make them c onfident.We have some competitor in the market and they are brand companies like Otobi, pertex, talukdar, Hatil etc. But many people don't know about their new service of renewable energy. So if we provide more equipment in a short time and advertise more than our business will get a brand name. 3. 12 Selling and Advertising At first we will sell our products base on our customers demand. We don't recruit any dealer for our product. We will sell our product from our sales centre. First time advertising cost will be more and we have to make peoples interest on our product.We will use TV, Radio, newspapers and Leaflet for our advertising, because these are the most modern and common means of advertising. 3. 12 Slogan and Logo Our Slogan is â€Å"Yes, we are Unique† Our Logo is 3. 13 Research analysis Population: The population of this research project has defined as follow: 1. Elements: All types of people who living within the Dhaka City. 2. Sampling units: All types of people ( Customer and Retailer) 3. Sampling Frame: The distributors and retailers which are located in Uttara, Gazipur, Nilkhet those who are selling different types of furniture. They are the sampling frame of research project. Primary data collected from – 1. Retailers 2. Customer of other furniture Company. 3. Different types of people * Sample size: As the population of this research project is 100 (50 Customers and 50 Retailers). * Sampling procedure: Among probabilistic sampling methods, simple random sampling procedure has been used in order to select sampling units from population. * Survey Process: Through face-to-face interview the survey process will be done. * Data processing and Analysis: Based on variables, researcher will analyze all the data basically throughout the subsequent style – 1.Descriptive statistics to identify user’s categories. Instrumentation: Through questionnaires and face to face interview. Activity To prepare this report we survey mark et many days. We have some question to the customer and retailers when we survey. The customer and retailer’s personal interview and question will be show in this chart: 3. 14 Corporate Social Responsibility We live in a society. We do business for the development of our society. So every business has some social responsibility. Our business has also social responsibility. By using our furniture people can save money but they will get well services from us.We will also spend 5% profit of our business for social development. With this money we will start Tree Plantation Program all over the country and try to fulfill the required 25% forest of our country. It is not possible right now, but we will try our best to complete this work within next20 years. We will also give merit scholarship to the poor meritorious students that they can continue their study. Every year we will take new program to develop our society and that is our corporate social responsibility in marketing. Pa rt 4| Financial Analysis| 4. 1 Cost of Project Making a place is very important for any kinds of business work.We have selected our industrial area at Saver. We have bought a land by loan. Our business construction has been already finished. The total cost of the project will be estimated at TK 30, 00, 00,000. The details costs of the project are as follow as- Particulars| Taka| Land and site development| 8,00,00,000| Building| 2,00,00,000| Machinery| 16,00,00,000| Technical expenses| 10,00,000| Pre-operative expenses| 20,00,000| Working capital| 370,00,000| Total| 30,00,00,000| | | | | 4. 2 Financial Plan and Loan Requirement Particulars| Owner’s Equity| Bank Loan| Total| Land and site development| 8,00,00,000| | 8,00,00,000|Building| | 2,00,00,000| 2,00,00,000| Machinery | | 16,00,00,000| 16,00,00,000| Technical Expenses| 10,00,000| | 10,00,000| Pre-Operative Expenses| 20,00,000| | 20,00,000| Working Capital| 3,70,00,000| | 3,70,00,000| Total| 12,00,00,000| 18,00,00,000| 30 ,00,00,000| Percentage| 40%| 60%| 100%| 4. 3 Means of Financing Company/Our institution will take 40% as owner's equity and other 60% will be taken as bank loan. The loan amount is 18, 00, 00,000 and 12, 00, 00,000 is the equity capital of Unique Furniture Ltd. 4. 4 Working Capital Requirement and Its Financing Particulars| Amount (TK)| Number|Raw materialsStocks of goods in processStocks of finished goodsOperating expensesTotal| 20,50,0006,00,0004,00,00033,333| | | 30,83,333| | | | | | | | 4. 5 Cost of Project Calculation Capital requirement| Amount| Amount| Fixed Asset:LandBuildingMachineryTotal Fixed AssetPre-operative expensesTechnical expensesWorking Capital:Raw materialsWork-in-processFactory overheadTotal Working CapitalTotal working requirement| 8,00,00,0002,00,00,00016,00,00,000| 26,00,00,00020,00,00010,00,0003,70,00,00030,00,00,000 | | 2,00,00,0001,00,00,00070,00,000| | | | | 4. 6 Income Statement (One Year) Particulars| Amount (TK)| Amount (TK)|Sales (30% Mark Up) Less: C ost of production: Raw materials Work-in- process Factory overhead Gross ProfitLess: Administrative expenses Selling expensesTotal administrative ; selling expenses Net Operating ProfitLess: Financial expenses Depreciation Earning before TaxLess: InterestLess: Tax (25%) Profit after Tax | 394,55,00,0002,45,00,0003,00,00,000| 512,91,50,000400,00,00,000| | 60,50,00,00020,00,50,0008,11,00,0001,30,00,000| 112,91,50,00080,50,50,000| | | 32,41,00,0009,41,00,000| | 23,41,00,0002,70,00,000| | | 20,71,00,0005,17,75,000| | | 15,53,25,000| | | | | | | 4. 7 Projected Income StatementParticulars| Year-2013| Year-2014| Year-2015| Year-2016| Year-2017| Sales (30% Mark Up))Less: Cost of productionGross ProfitLess: Administrative expenses Selling expenses Net Operating ProfitLess: Financial expenses DepreciationEarning Before TaxLess: InterestLess: Tax (25%)Profit After Tax| 512,91,50,000400,00,00,000| 615,49,60,000480,00,00,000| 738,59,76,000576,00,00,000| 886,31,71,20069120,00,000| 1063,58,05,4408 29,44,00,000| | 112,91,50,00060,50,00,00020,00,50,000| 135,49,80,00060,50,00,00020,00,50,000| 162,59,76,00060,50,00,00020,00,50,000| 195,11,71,20060,50,00,00020,00,50,000| 234,14,05,44060,50,00,00020,00,50,000| | 32,41,00,0008,11,00,0001,30,00,000| 54,99,30,0006,73,13,0001,30,00,000| 82,09,26,0005,58,69,7901,30,00,000| 114,61,21,2004,63,71,9261,30,00,000| 153,63,55,4403,84,88,6991,30,00,000| | 23,00,00,0002,70,00,000| 6,96,17,0002,29,95,107| 69,61,86,4201,83,89,481| 108,67,49,2741,30,93,010| 148,48,66,74170,02,069| | 20,71,00,0005,17,75,000| 44,66,21,89311,16,55,473| 67,77,96,93916,94,49,235| 107,36,56,26426,84,14,066| 147,78,64,67236,94,66,168| | 15,53,25,000| 33,49,66,420| 50,83,47,704| 80,52,42,198| 110,83,98,504| | | | | | | | | | | | | 4. 8 Cash Flow Statement Particulars| Year-2013| Year-2014| Year-2015| Year-2016| Year-2017| Profit After Tax| 15,53,25,000| 33,49,66,420| 50,83,47,704| 80,52,42,198| 110,83,98,504| Add: Depreciation| 1,30,00,000| 1,30,00,000| 1,30,00,000| 1,30,0 0,000| 1,30,00,000| Total Profit| 16,83,25,000| 34,79,66,420| 52,13,47,704| 81,82,42,198| 112,13,98,504| | | | | | | | | | | | | 4. 9 Balance Sheet Description| Amount (Tk)| Amount (Tk)| Current assets:CashAccount receivablesInventoriesFixed assets:LandLess: DepreciationBuildingLess: DepreciationMachinery Less: DepreciationTechnical ExpensesPower GridLess: DepreciationPre operating costTotal AssetsLiabilities:Accounts payableTaxLong term liabilities:Long term bank loanLess; 1st InstallmentOwner's equityTotal Liabilities| 12,00,00,0002,10,00,0005,00,00,000| 15,10,00,0005,60,00,0001,90,00,0009,50,00,00010,00,0005,70,00,0002,00,0,00040,00,00,000 12,66,99,28415,33,00,71612,00,00,00040,00,00,000 | | 8,00,00,0002,40,00,000| | | 4,00,00,0002,10,00,000| | | 10,00,00,00050,00,000| | | 6,00,00,00030,00,000| | | 7,49,24,2845,17,75,000| | | 18,00,00,0002,66,99,284| | | | | Part 5| Location Analysis| 5. 1 Location Description Location Address: 112B, Nabinagar, Dendabor Bazar, Savar-Dhaka. Area: 35100 sft. Price of the Land: Tk. 8,00,00,000Owner of the Land: Unique Furniture Ltd. Co. Part 6| Risk Analysis| 6. 1 Risks & Remedies 6. 1. 1 Risks * It’s a new business, people hardly recognized about it. * Lacking of relation with customers 6. 1. 2 Remedies * We have to make people concern about our service. * Home service employees should do their duties responsibly. Part 7| Conclusion| 7. 1 Conclusion In our country there are many kinds of furniture available in the market. But all are not good quality. On the other hand some are very good quality in the market, but there price is high. So we launched new unique furniture which is made by paper. This is high quality and also reasonable price.We are sure if unique furniture comes in the market people will willingly take it and they will be benefited. 7. 2 Recommendation * It is naturally difficult to launch a new product, as new company unique furniture has some limitation. * We will try our best to find out our problem a nd we solve our problem very soon * Customers are always welcome to give their comments * We are always ready to solve customer problems 7. 3 Bibliography 7. 3. 1 Reference of Books * Entrepreneural Development By A A Khanka * Business Ethics & Applications for Higher Secondary 1st & 2nd Paper By Md. Khalekuzzaman 7. 3. 2 Reference of Web-Sites: * www. google . com * www. ask. com * www. wikipedida. com 7. 3. 3 Product Samples:

Microsoft Word Tips Adding and Removing Watermarks

Microsoft Word Tips Adding and Removing Watermarks Microsoft Word Tips: Adding and Removing Watermarks Watermarks are faint images or words that sit behind the text in a document. There are many reasons you may need to use a watermark, especially in the business and professional publishing worlds. In this post, we’re looking at how to use watermarks in Microsoft Word. Why Use a Watermark? The most common uses of watermarks are to prevent an image being copied without permission or to show the status of a document. Here, we will focus on their use in written documents. Common cases where a watermark may be used in a document include: Using a â€Å"DRAFT† watermark for a work in progress Using a â€Å"CONFIDENTIAL† watermark for a document that contains sensitive information Adding a company logo to the background of each page in a document The faded writing would usually appear behind the text of your document. We will explain how this works in practice below. Adding a Watermark Microsoft Word offers a range of default text watermarks. These are categorized as follows: Confidential (e.g., â€Å"CONFIDENTIAL† and â€Å"DO NOT COPY†) Disclaimers (e.g., â€Å"DRAFT† and â€Å"SAMPLE†) Urgent (e.g., â€Å"ASAP† and â€Å"URGENT†) You can add one of these to your document by: Going to the Design Page Background on the main ribbon Clicking Watermark to open a dropdown menu Selecting a watermark from the options available Adding a watermark. This will add the selected watermark to every page. You cannot add a watermark to just part of a document. If you want to add an image to the background of specific pages in a document, you will need to insert the image and then use the wrapping and image formatting options. Removing a Watermark Removing a watermark from a document is very simple. All you need to do is: Go to Design Page Background Click Watermark Select Remove Watermark This will remove the current watermark from throughout the document. Removing a watermark. Custom Watermarks Finally, you can also add a custom watermark to a document if none of the default options are suitable. To do this, go to Design Page Background Watermark and select Custom Watermark. Custom watermark options. This will open a new window, offering two main options: Picture watermark – Here, you can select an image to use as a watermark (e.g., a company logo), the size the image will appear on the page, and how faded it should be (the Washout option). Text watermark – In this case, you will find options to control what the watermark says, as well as the font, size, color, transparency, and angle of the text. Once you have selected a watermark, simply click OK or Apply to add it to your document.

30 Words Invented by Shakespeare

30 Words Invented by Shakespeare 30 Words Invented by Shakespeare 30 Words Invented by Shakespeare By Michael William Shakespeare (1564-1616), considered the greatest writer in the English language, used more than 24,000 words in his writings, more than any other author. Of those words, more than 1,700 were first used by him, as far we can tell. He may have made up many of them himself. How can you possibly understand someone who keeps making up new words? Because Shakespeare made up his new words from old, familiar words: nouns into verbs, verbs into adverbs, adverbs into nouns. He added new prefixes and suffixes to existing words. For example, gloom was already a noun that meant ‘darkness’ and even a verb, but Shakespeare turned it into a adjective, as in ‘the ruthless, vast and gloomy woods’ in Titus Andronicus. Renaissance writers, trying to express classical ideas for the first time in English, often borrowed words from the classical languages of Greek and Latin, and William Shakespeare was no exception. Also, in Shakespeares day, the rules of English grammar were not yet formalized, so he was freer to invent his own. After more than 400 years of changes in the English language, Shakespeare is still beloved and still understood. Because of his knowledge of essential language, we still know what the Princess means in Loves Labours Lost when she says (archaically) Prepare; I will away tonight, even though she leaves out the verb go. Here are 30 of the words invented by William Shakespeare, as compiled by my colleague Maeve in her article Shakespeare’s Vocabulary, each one demonstrated in a sentence from one of his plays: accommodation: adjustment, adaptation, compromise Thou art not noble; For all the accommodations that thou bearst Are nursed by baseness. Measure for Measure agile: able to move quickly or easily His agile arm beats down their fatal points. Romeo and Juliet allurement: Attractiveness, appeal, enticement. That is an advertisement to a proper maid in Florence, one Diana, to take heed of the allurement of one Count Rousillon Alls Well That Ends Well antipathy: dislike, hatred No contraries hold more antipathy Than I and such a knave. King Lear catastrophe: disaster, the dramatic event that begins the resolution of the story And pat! he comes, like the catastrophe of the old comedy. King Lear critical: inclined to criticize, extremely important O gentle lady, do not put me tot; For I am nothing, if not critical. Othello demonstrate: show, display, present And this may help to thicken other proofs That do demonstrate thinly. Othello dexterously: skillfully, with precision. Dexterously, good madonna. Twelfth Night dire: dreadful, dismal, portentous Hapless Aegeon, whom the fates have markd To bear the extremity of dire mishap! Comedy of Errors dislocate: to put out of place They are apt enough to dislocate and tear Thy flesh and bones. King Lear emphasis: Special weight, attention, forcefulness or prominence given to something Be choked with such another emphasis! Say, the brave Antony. Antony and Cleopatra eyeballs: the eyes Tis not your inky brows, your black silk hair, Your bugle eyeballs, nor your cheek of cream, As You Like It emulate: imitate, copy I see how thine eye would emulate the diamond: Merry Wives of Windsor exist: to be, to have reality By all the operation of the orbs From whom we do exist and cease to be; King Lear extract: draw out, remove, withdraw, May it be possible, that foreign hire Could out of thee extract one spark of evil That might annoy my finger? Henry V frugal: thrifty, cheap, economical I was then frugal of my mirth: Heaven forgive me! Merry Wives of Windsor hereditary: inherited, passed on from parents Hereditary, rather than purchased; what he cannot change, than what he chooses. Antony and Cleopatra horrid: terrible, horrible He would drown the stage with tears And cleave the general ear with horrid speech; Hamlet impertinent: insolent, ill-mannered, irrelevant In very brief, the suit is impertinent to myself, Tempest jovial: jolly, cheerful, merry Be bright and jovial among your guests to-night. Macbeth meditate: think, contemplate, study I will meditate the while upon some horrid message for a challenge. Twelfth Night modest: moderate, slight, humble, Do not cry havoc, where you should but hunt With modest warrant. Coriolanus mutiny: tumult, strife, rebellion against a legal authority, especially at sea Good friends, sweet friends, let me not stir you up To such a sudden flood of mutiny. Julius Caesar obscene: indecent, offensive, repulsive O, forfend it, God, That in a Christian climate souls refined Should show so heinous, black, obscene a deed! Richard II pedant: a schoolmaster, someone who shows off his knowledge by using big words Most villanously; like a pedant that keeps a school i the church. Twelfth Night pell-mell: hasty, uncontrolled, confused Advance your standards, and upon them, lords; Pell-mell, down with them! Loves Labours Lost premeditated: deliberate, planned in advance Some peradventure have on them the guilt of premeditated and contrived murder; Henry V reliance: trust, dependence And my reliances on his fracted dates Have smit my credit: Timon of Athens submerged: underwater, below the surface, hidden So half my Egypt were submerged and made A cistern for scaled snakes! Antony and Cleopatra vast: Very large or wide The suns a thief, and with his great attraction Robs the vast sea: Timon of Athens Could we make up new words too, and still be understood? In imitation of Shakespeare, I tried making up a couple do you understand me? The anticlean toddler boy. Though you lamb yourself after your violence, quoth Sherlock, yet before judge and jury I will unlamb you. Shakespeare invented many words that might surprise you. In Shakespeares day, friend was already a noun, but Shakespeare turned it into a verb. Befriend is a more standard verb that expresses the same thing, but a newly-coined word has extra power and surprise but unless you do it discreetly, youll sound like e e cummings or James Joyce. Shakespeare also used the word unfriended, centuries before Mark Zuckerberg. The word swagger, popular with rap musicians, was first used in Henry V and A Midsummer Nights Dream, though Shakespeare didnt invent the word swag. Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the Vocabulary category, check our popular posts, or choose a related post below:15 Terms for Those Who Tell the Future20 Rules About Subject-Verb AgreementWoof or Weft?

Sports Medicine

Sports Medicine Introduction Sports medicine is a branch of medicine that deals with identification, treatment, and prevention of injuries in sports (Edelson 53). In addition, it deals with physical fitness and wells of preventive services include education on safe training methods and procedures. On the other hand, rehabilitative services include ways to hasten recovery and avoid deterioration of injuries. The American Osteopathic Academy of Sports Medicine (AOASM) classifies sports medicine into two classes that include surgical care and primary care (Schepsis and Busconi 78). Surgical care includes surgical operations that repair joints, ligaments, and tendons. Primary care includes all other medical procedures that do not involve surgery. Some aspects of primary care include nutritional guidance that helps athletes choose foods that promote physical activity and strength.Advertising Looking for essay on health medicine? Let's see if we can help you! Get your first paper with 15% OFF Learn More Importance of sports medicine The sports industry is an important sector of the global economy. Countries that participate in national and international sports events generate revenue that develops their economies and improves lives of athletes (Schepsis and Busconi 61). Therefore, the health of athletes should be improved in order for countries and athletes to benefit fully (Engerbretsen and Steffen 961). Sports medicine is important because it monitors physical activities that involve many risks, which predispose athletes to injuries. Injuries cause great harm to the body and reduce performance and productivity of athletes. In addition, physical injuries may result in long-term physical complications such as organ amputation and paralysis (Engerbretsen and Steffen 961). For example, fractures cause joint pains, body aches, and arthritis. Therefore, it is important to avoid, and treat injuries. Regaining mobility and activity after injury requires skills of trained medical practiti oners who possess knowledge on how to induce recovery of bones and tissues (Engerbretsen and Steffen 961). Sports medicine is also important because it helps prevent future injuries thus enabling athletes improve their performance. Physical injuries cause great pain and suffering to athletes because they sometimes take long to heal. In addition, they occasionally lead to irreparable damages that end careers of athletes. Some athletes have been paralyzed due to severe brain injuries that resulted from physical injuries. In addition, others have had their hands or legs amputated to prevent further damage. Sports medicine helps prevent such incidences among athletes (Engerbretsen and Steffen 962). Common sports injuries Common sports injuries include concussion, muscle cramps, ankle sprain, ACL sprains, and shin splints (Schepsis and Busconi 39). Concussion results from extensive head trauma due to violent movement of the brain within the skull. Muscle cramps result from sudden contrac tion of muscles and consequent failure to relax. They do not cause serious complications because recovery is quick. ACL sprains results from poor coordination between feet and knees. They arise when knees twist while the feet are firmly positioned on the ground without any movement to complement the knees’ movements (Schepsis and Busconi 41). Ankle sprains result from excess stretching of ligaments due to strenuous physical activity. Shin splints results from overuse of muscles that connect the lower leg to the shinbone (Schepsis and Busconi 43). Conclusion Sports medicine is not a new concept in the world of athletics. Its history can be traced back to the 5th century. It involves identification, treatment, and prevention of injuries in sports. In addition, it deals with physical fitness and well-being of individuals involved in sports and physical exercises. It is a wide field of study and practice because it encompasses skills and knowledge of different professionals that include medical doctors, kinesiotherapists, athletic trainers, nurses, nutritionists, physiologists, and doctors of osteopathy. It takes care of all aspects associated with athletes’ safety and health. One of the most important aspects of sports medicine is the sport medicine team. It comprises therapists, coaches, physicians, and athletes. Each of these groups of members plays a different role in the team. Coaches develop training programs, physicians treat injuries, and therapists offer advice on appropriate training procedures. The primary focus of sports medicine is quick recovery of athletes from injuries. Common sports injuries include concussion, muscle cramps, ankle sprain, ACL sprains, and shin splints. Sports medicine is important because it prevents and cures injuries that may have long-term effects on athletes such as paralysis and organ amputation. In addition, its services are important because they help to improve the performance and safety f athletes. Edelson , Edward. Sports Medicine. London: Chelsea House, 2001. Print. Engerbretsen, Lars, and Steffen Kathrin. The Importance of Sports Medicine. British Journal of  Sports Medicine 43 (2009): 961-962. Print. Narvani, Amir, and Lynn Bruce. Key Topics in Sports Medicine. New York: Taylor Francis, 2006. Print. Schepsis, Anthony, and Busconi Brian. Sports Medicine. New York: Lippincott Williams Wilkins, 2006. Print. Snook, George. The History of Sports Medicine. The American Journal of Sports Medicine 12.4 (2011): 252-254. Print.

The New Narcissism Essay Example | Topics and Well Written Essays - 500 words

The New Narcissism - Essay Example In his view, the structure has gradually come to be prime psychological diagnosis in contemporary life. Lasch expresses that most of modern societies tend to recognize individuals based on a hierarchical relationship that is usually expressed as in form of symbols such as material wealth and a self-indulgent lifestyle. In these societies, relationship to other is therefore based and determined by the ability to compete with others on acquiring these symbols. Consequently, these societies regard personality as a means to fostering communication as well as breeding callous competition. Similarly, due to the fact that every person in these societies is focused on acquiring the relationship symbols, most actions done are usually ignored irrespective of their legality thereby conforming to the Narcissist traits of neuroticism, passive aggressiveness or obsession to a point of being a bully or an opportunist (Lasch). Another theme that is clearly presented in Lasch’s idea of narcissism in the society is that pertaining to disregard of the elderly within contemporary narcissist societies. This is possibly because such societies tend to perceive ageing as a sign of weakness in the competition that exists within such societies. The same case also applies to those having ill health. Their vast knowledge and wisdom of life is similarly ignored or is considered irrelevant, which is a pathway to their isolation within the society. In other words, such a culture tends to undervalue old experience and instead places more emphasis on physical strength and agility such that their definition of productivity exclude the old generation (Lasch). Lasch also presents another issue of the perception of women by men in these new narcissists’ societies. He presents that most women have come to resent men perhaps sue to the constant discrimination that the

Business study report Assignment Example | Topics and Well Written Essays - 2750 words

Business study report - Assignment Example A company frames its positioning, branding and segmenting strategies, after considering the business strategies introduced by its primary competitors (Yabushita & Suehiro, 2014). However the report will show that the aggregate profitability, cost and revenue experienced by a company are significantly dependent on the nature and efficiency of its factors of production. The scale and scope of commercialization practiced by a company depends on these factors (Colquitt, et al., 2013). Along with internal business aspects, commercial prosperity of a company depends on the external political and economic conditions. The report will show that political and economic outcomes of Thailand will create significant impact on the business of Charoen Pokphand Group. Finally the researcher will provide a brief focus on the role of sustainability in the modern business world. Thus long run success of a company depends on a series of macroeconomic and internal business interaction. Charoen Pokphand Group (CP) known as one of the biggest conglomerate of Asia. The company was founded in 1921 and its headquarters are located in Bangkok, Thailand (Yabushita & Suehiro, 2014). After its inception, the company has considerably expanded the scale and scope of business internationalization. At present, CP provides its services and products in more than 20 countries of the world. The business of CP is segmented in three major industries, namely telecommunications, retailing and food and agro-industry. The company has its own restaurants, telephone companies, hypermarkets, convenience stores (Yabushita & Suehiro, 2014). It also provides internet services to its customers and sells certain edible items such as meat and frozen food. Charoen Pokphand Group is a giant multinational company of Thailand and it trades its products and services to government, corporate companies and also common household customers in the market. CP

Love , Statement purpose Essay Example | Topics and Well Written Essays - 500 words

Love , Statement purpose - Essay Example The presentation was so welcomed and acclaimed by the teachers that I felt the passion and energy grow in me. This propelled me to work harder when I went to high school. Indeed, my results in high school were a reflection of my passion in the field of electronics. The exemplary performance in this field did not come by hard work alone but was accompanied by discipline, focus, and mentorship from various teachers. I must say that most of the personal development I have today is because of the modeling I have experienced during my undergraduate degree. The electrical engineering course was one of the toughest tasks I have ever undergone in my entire life. It involved solving complex problems and performing rigorous researches in various units within the course. However, I did not relent in growing both personally and professionally. Personal development began with my enactment to the head of student council in 2006. The student leadership enhanced my leadership skills. However, personal development went beyond to encompass intercultural activities for which I received acknowledgment from UAE embassy. All the challenges and opportunities I have experienced have taught me to optimize my mental resources to think logically about difficult and complex problems. In the process, I have gained profound problem solving techniques, which I plan to use in the field of business logistics or financial engineering. I do understand that a lot of investment goes towards developing a globally recognized intellectual in any field. I count this stage in my life as a transition from a modeling to a refining stage where I will refine and tune my abilities towards one specific career. Therefore, I plan to utilize all the available opportunities towards achieving my goals. As I have grown more mature, learned, intelligent, and focused, I believe that I am the best candidate for consideration for any

Effect on Demand for Coke as a Result of a fall in the Price of Pepsi Essay

Effect on Demand for Coke as a Result of a fall in the Price of Pepsi - Essay Example There is a vice versa effect on the demand for the good whereby the demand decreases as a result of an increase in the price of the good. There are certain factors that affect the demand for a good or a service. There is the effect on the demand for the good and services as a result of the level of income of the consumer. The consumer can demand more goods with a given level of income when the prices of the goods fall. With the same level of income, the consumer demands fewer goods and services if the price of the goods is increased (Hildenbrand, 2014). There is also the effect of demand for goods and services due to the substitution of the goods. The demand for a good and service falls if the price of the substitute good falls since the consumers turn to the cheaper one. The consumers aim at saving and hence prefer the cheaper goods than the expensive substitutes hence affecting the demand for the two goods both negatively and positively. Consumers use different goods to satisfy the ir needs. There are particular goods that can be used to satisfy the same need of a consumer regardless being of different forms. There is usually a rise in the level of demand of one good if the price of the other good rises and the other one falls. An example of such goods is the Coke and the Pepsi product in the market (Hildenbrand, 2014). These products satisfy the same need of the consumers since they are all soft drinks and they can all be used to quench thirst. This serving of the same purpose by the coke and the Pepsi where the coke can be used instead of Pepsi and Pepsi can be used instead of coke to satisfy the same need makes them perfect substitutes. The coke and the Pepsi products being perfect substitutes can have their demands affected differently by changes in their prices. A change of the price of one good would affect the demand for the other good.  

Shell and tube heat exchanger design Coursework

Shell and tube heat exchanger design - Coursework Example The wall has to be conducive to allow heat exchange and still be sufficiently strong to withstand fluid/gas pressures. In shell and tube heat exchangers, two closed process streams move across the unit; one move inside the tube and the other moves on the shell side. Convection and conduction allows heat to pass from hot stream to cold stream from the side of the tube side or from shell side. As temperature variation between the process streams rise, heat exchange rate for every surface area unit also rises. Conversely, heat exchangers per surface are unit drops non-linearly as temperature difference between the two process streams drops. Increasing the effective surface area of the entire system helps in maintenance of the total transfer of heat between two streams although eventually the system reaches a point where extra surface area has no effect on extra heat transfer. The other variable which affects heat exchange in shell and tube exchanger is each process stream’s velocity. This velocity directly contributes to a rise in convection cold process and hot process streams. Raising the velocity also raises heat exchange, more especially, in countercurrent design. Finally, velocity increments are limited by maximum permitted for a specific metallurgy constituting shell or tube. For carbon steel, for instance, velocity cannot exceed 6 ft. /sec. whilst for the case of stainless and high-alloy steel; rate is 12 ft. /sec. for liquids. The three conventional types of shell and tube heat exchangers are parallel, cross flow and countercurrent flow types. The names are derived from the process stream directions in relation to each other. In countercurrent heat exchanger type, average temperature variation between the process streams is optimized over the exchanger’s length, showing the highest heat transfer rate efficiency over a surface area un it. With respect to existing temperature variations observed during operation, parallel heat exchangers exhibit the lowest heat transfer rates, and then cross flow heat exchangers, and finally, countercurrent heat exchangers. Counterflow and parallel heat exchangers are illustrated below, Figure 1: Counterflow and parallel heat exchangers The design of shell and tube heat exchanger depends on flow pattern through the respective heat exchanger. It is however the most widely used heat exchanger in industries and can adopt counter-flow, parallel flow or cross-flow pattern. However, heat transfer area is a major factor in design calculation. Theoretically though, shell and tube heat exchanger flow patter is conventionally not specifically counter-flow, or parallel. Rather, it incorporates a mixture of counter-flow, parallel flow and cross-flow. Log mean temperature variation, used for design of shell and tube heat exchanger, works best for varied flow patterns occurring in this kind of heat exchanger. Shell and tube heat exchangers Shell and tube heat exchangers in their various construction modifications are probably the most widespread and commonly used basic heat exchanger configuration in the process industries. The reasons for this general acceptance are several. The shell and tube heat exchanger provides a comparatively large ratio of heat transfer area to volume and weight. It provides this surface in a form which is relatively easy to construction in a wide range of sizes and which is mechanically rugged enough to withstand normal shop fabrication stresses, shipping and field erection stresses, and normal operating conditions. There are many modifications of the basic configuration, which can be used to solve special problems. The shell and tube exchanger can be reasonably easily cleaned, and those components most subject to failure -

Effect on Demand for Coke as a Result of a fall in the Price of Pepsi Essay

Effect on Demand for Coke as a Result of a fall in the Price of Pepsi - Essay Example There is a vice versa effect on the demand for the good whereby the demand decreases as a result of an increase in the price of the good. There are certain factors that affect the demand for a good or a service. There is the effect on the demand for the good and services as a result of the level of income of the consumer. The consumer can demand more goods with a given level of income when the prices of the goods fall. With the same level of income, the consumer demands fewer goods and services if the price of the goods is increased (Hildenbrand, 2014). There is also the effect of demand for goods and services due to the substitution of the goods. The demand for a good and service falls if the price of the substitute good falls since the consumers turn to the cheaper one. The consumers aim at saving and hence prefer the cheaper goods than the expensive substitutes hence affecting the demand for the two goods both negatively and positively. Consumers use different goods to satisfy the ir needs. There are particular goods that can be used to satisfy the same need of a consumer regardless being of different forms. There is usually a rise in the level of demand of one good if the price of the other good rises and the other one falls. An example of such goods is the Coke and the Pepsi product in the market (Hildenbrand, 2014). These products satisfy the same need of the consumers since they are all soft drinks and they can all be used to quench thirst. This serving of the same purpose by the coke and the Pepsi where the coke can be used instead of Pepsi and Pepsi can be used instead of coke to satisfy the same need makes them perfect substitutes. The coke and the Pepsi products being perfect substitutes can have their demands affected differently by changes in their prices. A change of the price of one good would affect the demand for the other good.  

Marx Misses the Point Essay Example | Topics and Well Written Essays - 1250 words

Marx Misses the Point - Essay Example Precisely so: that is just what we intend" (Marx 337). For the purposes of this paper, Marx misses the point on three levels. His reduction of complex economic relationships into two broad categories is an oversimplification that is as inaccurate as his proposed solution is feckless. His assertion that free trade is tantamount to exploitation is misguided and has no basis in fact. Finally, the presentation of communism as the panacea for all the ills of industrial society is nave; in fact, once Marx's scheme is brought from ideology into practice the result is that communism and the state simply become a replacement of one type of repression for another. Communism, when applied to the lives of real people, ironically becomes his decried bourgeoisie in a different cloak. Through oversimplification, inaccuracy, and flawed methodology, Marx misses the point; individual freedom. Marx frames his initial assertion for the two class distinctions in terms of time. He avers that "[o]ur epoch, the epoch of the bourgeoisie, possesses, however, this distinctive feature; it has simplified the class antagonisms" (322). Had he had the ability to project forward in time, beyond his epoch, he would see the colossal failures within the practical application of his ideas. That sort of time projection being impossible for him, however, let's examine his initial, basic assertion: "Society as a whole is more and more splitting up into two great hostile camps, into two great classes directly facing each other: Bourgeoisie and Proletariat" (Marx 322). Anytime broad generalizations are used to describe complex situations, inaccuracy is the result; particularly with subjects as convoluted as economy and politics. For Marx, there is a ruling class of people and institutions who have capital and power. This group, in his mind, is exercising exploitation and control over the masses . On the other side of his equation, lie the disenfranchised workers who are the grist for the industrial mill. For Marx, these two are diametrically opposed to each other and are hostile. The problem with his approach, like any person who thinks in terms of black vs. white, is that it is too simplistic. There are shades of grey within the groups that his dual class approach does not accommodate. An organized, funded, and complete "bourgeoisies" does not exist; nor does a suppressed, victimized, and grouped "proletariat." There certainly are capitalized entities that take advantage of laborers. That fact notwithstanding, there are also many industrial operations that function in partnership with labor to harmoniously provide goods and services to society while maintaining a happy and healthy workforce. These are symbiotic relationships where no hostility exists. It is within the context of individual freedom that these beneficial relationships exist. Marx, however, takes issue with that freedom, turning it into something evil. In practical application, the term bourgeoisie simply becomes a label applied to a person or company that displeases the labeler. Exploitation Marx's propensity for negative labeling does not stop with grouped classes, but also extends to the commercial activity of society. He sees

Jake in Transition Essay Example for Free

Jake in Transition Essay The following essay is in response to the Jake in Transition exhibit which displayed the many psychological and physical stages Jake went through to change his gender from a woman to a man. The artist of the exhibition demonstrated different stages of Jake’s transition from female to male. As the artists discussed in his interview, he felt â€Å"awkward† at first when photographing Jake. This awkwardness is to be expected, society has socialized us to feel certain ways about gender, creating stereotypical feelings. Since the time an individual is born, they are taught by society what is expected of them as either a male or female. However, in some cases such as Jake’s, some individuals are born one gender and feel as though their gender is a wrong fit. In Jakes case, he was born a female but was so uncomfortable in his own body that he felt he had to physically change it to a male body in order to be comfortable. I believe Jake felt the need to conform to society’s gender ‘norms†; his body was female but he felt he did not demonstrate typical female attributes as depicted by society. Jake went to extreme measures to conform. Jake discussed how he felt being a woman, his fear of being considered a â€Å"freak† because he was trapped inside a woman’s body with the mentality and tendencies of a man are a result of society’s ideology of gender roles. Jake went against this ideology when deciding to take surgical measures to become a man. Jake demonstrates his â€Å"natural† male instincts after his surgical procedure when he marries the woman he loves. Other activities he enjoys, such as, horse riding and playing the guitar are not typically attributed to either gender; as both men and women enjoy partaking in such activities but Jake however feels these are masculine activities. The exhibit displayed Jakes surgery photos, which caused me antagonistic feelings at first. I had not expected to be effected by this, breast surgeries are broadcasted on the television daily. Jake however, was removing her female identity, I am still unsure if this is a personal feeling or one that I have been trained by society to believe is wrong. I am leaning towards the latter, since I can not identify with Jake’s unhappiness with his born gender. I can not say I agree with changing ones gender through surgery. I do however understand Jake’s need to share his experience, in hopes to find acceptance in a society with such rigid gender norms. I question the underlying factor that caused Jake to go through such extremes as to remove all traces of femininity. I feel there must have been a deep resentment of his female body for him to go against nature and wipe out his female gender. If it were just a matter of sexuality, that Jake was attracted to females, I doubt it would have led to him getting surgery. I was deeply disturbed by the story of â€Å"x†. It disgusted me that anyone could have given birth to a baby for the sole purpose of using it for an experiment; and inevitably ruining its future. Baby X was raised without an identity. Gender roles, while drastically influenced by society, gives an individual a purpose. Jake was confused by his feelings which he did not associate with being female and thus changed his physical image to match his feelings of masculinity. X however, had no basis in which to judge its feelings. X was not socialized in a way that would help him understand his identity. Although we are not told what happens to X past elementary school, I foresee him having extreme emotional problems; more specifically, a lack of identity. Jake felt he did not fit in with females but X has no reference in which to judge if he fits in or not. Society influences how we see â€Å"normal† gender roles. Many, if not all, cultures have an essentialist view of what roles are contributed to males and females. While some individuals may feel that they do not conform to this ideology; Jake took drastic measures in which to conform. I think this says a lot for the extreme influence society has on gender roles. Jake wanted his body to look as masculine as he felt; so he would not feel like a contradiction to societies norms.

The Importance Of Environmental Risk Assessments Environmental Sciences Essay

The Importance Of Environmental Risk Assessments Environmental Sciences Essay Environmental risk assessment is an integral part of a project. It is important that a project attributes due weight and consideration to the assessments conclusions, although it is just as imperative that an assessment identifies the assessment endpoints in order to determine the application and usefulness of the assessment. Depending on the specific project, an environmental risk assessment can be utilised to assist a project to assess strategic and or tactical uncertainties, as well as assisting in making the best informed decision given the circumstances. (Beer Ziolkowski, 1995, p. 6) Environmental risk assessment is the process (Joint Technical Committee OB/7 Risk Management, 1999) that analyses, considers and then places into a criterion framework the risks to human health, welfare and ecosystems that are the result of adverse developmental impacts on the natural environment. (Beer Ziolkowski, 1995) The placement of the foreseeable risks into a specified criteria, level and/or predetermined standard enables a project to consider, in comparison to the same, what environmental hazards have the greatest potential of occurring, as a result of a specific project, to the selected endpoints and what action (if any) is required. (Joint Technical Committee OB/7 Risk Management, 1999), (Beer Ziolkowski, 1995). The usefulness of environmental risk assessment can depend on what criteria, pre-determined standard and/or level is being utilised as an acceptable comparison. What may be important to one specific environment may not be important to another, therefore, it is important, prior to the commencement of the environmental assessment, that the environmental values to be protected (Stoklosa), the endpoints are agreed. The importance of environmental risk assessment as a necessary component of a project is evidenced in a recent predictive case study commissioned by Alcoa, the worlds largest producer of aluminium (Alcoa Inc.), with respect to an aspect of the construction of its proposed aluminium smelter in East Iceland. (Booth, et al., 2009) (referred to as The Aluminium Smelter Study). The Aluminium Smelter Study is an example of predictive risk assessment. The study was conducted to determine whether there would be a consequential difference in the level of risk to human and ecological receptors from constituents in air emissions from the aluminium smelter (prior to construction), either with or without wet scrubbers. (Booth, et al., 2009, p. 423) Gaseous emissions from the aluminium smelting process are minimized by existing controls, although not all emissions are captured by these basic controls. Prior to the commencement of the study, there was no certainty regarding whether the addition of wet scrubbers to the basic controls would provide any additional benefit as these also introduce an environmental cost. It is necessary for Icelands Permitting Authority, if they are to approve the Smelter without the need for the wet scrubbers, that an environmental risk assessment is conducted with the harm for both scenarios, with and without the wet scrubbers, explored in advance, in order that the authorities can make an informed decision. Although wet scrubbers can in some circumstances control gaseous emissions, the contaminants removed by the scrubbing are transferred into the smelters surrounding water ways, potentially causing harm to the surrounding ecology and humans alike. For the purpose of the assessment, the selection of the emissions/contaminants present in the smelter region, which may be emitted with or without wet scrubbers, were determined on the basis of what the principal constituents of gaseous emissions from primary aluminium production are. (Booth, et al., 2009, p. 429) These include, fluorides, particulates, sulphur dioxide, carbon dioxide, carbon monoxide, perfluorocarbons and polycyclic aromatic hydrocarbons (PAHs). The design of the smelter and the operational controls already in place were considered prior to identifying the contaminants that may pose a potential risk to the pre-determined endpoints. Whether or not the wet scrubber process will cause substantial harm to the environment requires a risk assessment of weighing the environmental risks of exposure to humans and the environment to the emissions and waste generated with and without the wet scrubbers. . The environmental endpoints for the purpose of this environmental risk assessment were selected on the basis of a number of criteria, including, amongst others, the ecosystems and species that are present in the Hraun industrial tract and surrounding areas in Ewyarfjorour, Fjardabyggd, on the east coast of Iceland (Booth, et al., 2009, p. 425) in close proximity to the aluminium smelter site. In addition, further endpoints were selected by considering terrestrial and marine site studies (which) were conducted (Booth, et al., 2009, p. 425) in the early planning phase and using the information obtained to determine what plants and animals in the surrounding area could be at risk from the wet scrubber emissions. The human environment endpoints were also assessed, utilising studies completed in the planning stage of the smelter site and its surrounding Fjord area. The Aluminium Smelters location in East Iceland presents a unique environment, where there is little development and, due to both the weather and terrain, a relatively stable population level, see Figure 1 of Appendix A . The studies assessed the population of the surrounding area, noting that the terrain restricts much human population, the potential exposure pathways (i.e the drinking water for the residents in the villages is the river Delta and those outside the villages use bore water, neither of which there is any indication the smelter will affect.) and whether the populations source of food will be affected and, in turn, could indirectly expose the human population to harm. The Aluminium Smelter Study measured the harm to both human health and the ecology by developing a number of different conceptual models to assist in identify(ing) the controlling variables that affect exposure and risk, and to focus the risk assessment process on the most important pathways of potential exposure. (Booth, et al., 2009, p. 430) Figure 2, at page 431, is an illustration of a conceptual site model, which assists to identify the exposure pathways from the source, its transport, the media, (i.e air, soil, water) and then the effect on humans and the ecology. In particular, attention is directed when electing the endpoints to those plants, animals and humans that are potentially sensitive, or will be at greater risk of exposure, to the emission contaminants as identified as potentially being present. Further consideration must also be directed to ecologically important species and those species having special regulatory status (if appropriate) or social importance. (Booth, et al., 2009, p. 430) If, after having conducted all of the above and considered all the contributing factors of the models, a pathway was identified as having a potential to be complete, that factor was then assessed as posing a potential risk to the end point Alcoa engaged Earth Tech to conduct the air dispersion modelling, which was required to assess both the human and ecological risk assessments. Air dispersion modelling was chosen as the best method, considering the difficult Fjord landscape and complex wind conditions, to determine the effects on the receptors from the wet scrubber and no wet scrubber smelting scenarios. A copy of Earth Techs report is annexed at Appendix B. A copy of Earth Techs report is annexed at Appendix B.A number of air modelling scenarios were simulated in order to assess exposure to provide the relevant basis for comparison to standards that are protective of human health and the environment (Booth, et al., 2009, p. 434). These scenarios are illustrated in Table 2 and the time frames were chosen in order that the results could be compared to the corresponding regulatory limits that are protective of human health. The different environmental values to be protected require different measures of assessment. For example, in order to measure the harm of the risk to plant species in the Fjord, the model requires modelling for annual mean sulphur dioxide (SO2) (one of the identified emissions) exposure as toxicology-based screening values for plants are expressed as annual averages. The results of the dispersion models were exhibited on a geographic grid. For a more detailed explanation of the grid and a copy of the same, see page 437 (Booth, et al., 2009). (Katie, what does this add?) In order to assess the risk of the estimated air concentrations and deposition rates, with or without the effect of seawater scrubbers, the two scenarios were compared on a point-specific basis or were examined statistically or probabilistically to describe the nature of exposure to each constituent by sensitive receptors. The study not only conducted air modelling exposure modelling, the risk assessment process also utilised previously conducted marine dispersion modelling, which assessed the harm to the Fjord marine ecology, including modelling sediment and the concentration in water of elements such as fluoride, another of the identified end point contaminants. The marine dispersion models were then assessed using data from further previous studies, as well as data collected from other Alcoa facilities, such as those in Canada and Norway as a means of verifying the reasonableness of the predictions at Fjord. (Booth, et al., 2009) In addition to the air dispersion modelling and marine dispersion modelling, the risk assessment also assessed the potential adverse effects from sediment bound substance and dissolved substances (Booth, et al., 2009, p. 438) from the discharge of water into the Fjord in the situation of the seawater scrubber. The constituents, in particular PAHs (emission of which is usually associated with effluent sediment from the wet scrubber), that were hypothesised to be released into the Fjord, were selected to be assessed. The harm of these constituents (see page 438) was measured by comparing modelled concentrations in sediment and water to available toxicity thresholds and screening benchmarks. (Booth, et al., 2009) Similar modelling was utilised to assess the effect of the scrubber discharge to wildlife, including food web modelling for species that forage on items that could potentially accumulate PAHs. (Booth, et al., 2009). Similarly, the harm to plants was measured by comparing the mo delled air emission concentrations of SO2 and fluoride to conservative toxicity thresholds for sensitive plant communities. Further, the risk to vertebrates was determined on the basis of predicted concentrations of fluoride and PAHs (sic) in the diet of herbivorous mammals and birds, based on the EarthTech air modelling results and plant uptake models, and comparing those dietary concentrations to toxicity thresholds developed from the scientific literature. (Booth, et al., 2009, p. 438) There were some limitations in the study on the effect of emissions from the two alternate scrubber scenarios, which are discussed in further detail at page 439. The quantitative results to the identified receptors and the concentration estimates of emission constituents in the air from inhalation exposure were measured to be considered in comparison with all relevant standards, and PAHs (sic) were compared with health-protective screening values for air and soil. In addition to the human risk of inhalation of the emissions, the study also assessed the harm from dermal (skin) contact to humans, one of the identified endpoint pathways. The soil concentrations, in accordance with the model (see page 439), were then compared to well-accepted health-protective soil preliminary remediation goals for BaP and HF developed by USEPA. The potential harm on human health from the discharge of constituents in the air and soil were measured by comparison to elected, accepted benchmarks. Each of the different models required different types of methods to measure the predicted harm. In order that the risk assessment provides the most accurate conclusions that can be relied on for decision making, the different end points required different benchmarks for assessment. For a more detailed assessment of the effect of the identified emission contaminants on the endpoints, see page 439. The results of the modelling predictions on the level of risk to human and ecological receptors indicated that both scenarios produce results that are lower that the identified risk thresholds and, by and large, the risk to all end points was lower for a smelter without wet scrubbers. Alcoa submitted the results of the environmental risk assessment to the Government of Icelands Permitting Authority and, in turn, the Authority approved an operating permit for the facility without the need to install seawater scrubbers. (Booth, et al., 2009, p. 440) It must be noted that some caution must be attributed to the risk assessments findings as it was financed by Alcoa, however a disclaimer appears on page 1 of this study, the opinions expressed are the independent scientific views of the authors (Booth, et al., 2009, p. 423) and it would appear that the Iceland Permitting Authority agrees. The benefit for Alcoa was threefold. Firstly, by successfully obtaining the Iceland Governments permit, they were not required to expend the additional cost of constructing the seawater scrubber. Further, the results of the environmental risk assessment were able to be distributed to the local community, assisting Alcoa in continuing to uphold its duties to the people of the area faithfully. (Alcoa Inc.) Finally, Alcoa have utilised the environmental risk assessment to demonstrate the long-term sustainability of operations, as well as environmental protectiveness. (Booth, et al., 2009, p. 440). The information obtained from the environmental risk assessment process was a necessary component of Alcoas aluminium smelter Iceland project.

Adolescent Peer Pressure :: Peer Pressure Essays

Between the ages of twelve and nineteen is a period in a teenager's life that determines what kind of adult he or she will become. This period of adolescence, also known as the "formative years", is the subject of much study and research to determine why adolescents are vulnerable to the phenomenon called peer pressure. The disturbing number of incidents of teenage drug use, teenage pregnancy and teenage suicide is most assuredly the reason that fuels the need for such research. Perhaps it is because as children they are taught the importance of having and maintaining friends. Or perhaps they don't feel that they can talk to their parents or teachers when problems arise. Or maybe they simply want to rebel against the pressures placed on them as youths. Because adolescents spend their time either at home or in school, it is within these confines that the answers to adolescents' behavior lay. In other words, family and school can sometimes cause adolescents to give in to peer pressure because of an overemphasis on the importance of social adjustment, a lack of interest or communication on the part of the parents and teachers, and the unrealistic expectations that these entities create. Although the purpose of attending school is to receive an education, it also provides children with a medium through which they can develop relationships with other children that eventually turn into friendships. The ability to form friendships can be traced back to even the pre-school years and its importance henceforth emphasized by eager parents who want their children to fit in at school. "Interactions with friends or other peers are crucial for the development of a mature morality." (Juvonen, p.11) Most would agree that social interaction is important but sometimes parents are guilty of over-emphasizing this importance. Let's recall the numerous birthday parties where every child in the neighborhood was invited to come regardless of whether or not they were actual friends. This desire to socialize children also occurs in the classroom at school. "The classroom setting represents not only an educational arena but a powerful social context in which the psychological adjustment of children and adolescents can be affected."(Juvonen, p.248) Teachers tend to promote social interaction by assigning exercises that require working in pairs or groups. Furthermore, when a teacher spots a child playing alone, they will encourage him or her to join the other children while overlooking the possibility that the child might have preferred to be alone.

Causes of Dictatorship in Russia :: Russian Russia History

Causes of Dictatorship in Russia Around the 20th century, the end of the First World War cleared the way for the formation of democratic regimes. Why they had not been successful, why the people didn't use the opportunity to establish a democratic political system and why did the dictatorships appear, is still unclear, but it is a very discussible subject. The decisive role in these processes was the human being. It was the object of the cause, but on the other hand he was also the subject - executor of all the problems as well. The First World War was expected to be short, with a quick triumph on either side. On the contrary, the war caused a giant massacre to all the countries involved, and lasted for four years. Also against the expectations of political leaders and military commanders new techniques of fighting were used, as well as new weapons (for example the chloric gas, tanks and aircrafts). Due to all this, 13 million people were killed, of which 2 million were Germans, 1.75 million Russians, 1.5 million Frenchmen, 1 million British and 0.5 million Italians. But death was just one of the worst consequences of the First World War. Just military failures on the fronts, along with other problems directly affected internal politics in a great way. This horrible catastrophe also left most of the countries in huge debts, especially Germany, Austria, Hungary, Russia, and many others. This led to poverty and chaos, and the people were suffering. That is why they started to revolt, but the political system w as so exhausted after the war that it didn't do anything to solve this. The effects of the war sped up the changes. It is an arguable fact, whether the war also had a liberating effect. If it did, it was greatly affected by the downfall of three empires, the Austro-Hungarian Empire, Tsarist Russia and Keiser's Germany. In Russia the tsar abdicated and was replaced by the Provisional Government, but it only took 8 months and Russia moved from autocracy to communism. It is true that this downfall separated and freed different ethnic groups like Czechs and Slovaks, Serbs, etc. who had been a part of the Austro-Hungarian Empire, because these ethnic groups did get their independent states with democratic constitutions. Land was taken from the aristocrats and distributed to the peasants. The workmen got better conditions to work in, for example bigger salaries, less working time, social securities and so on.

Upward Initial Velocity

1). A stone is dropped from rest from the top of a tall building, as Figure  2. 17  indicates. After 3. 00 s of free-fall, what is the  displacement  y  of the stone? | The stone, starting with zero velocity at the top of the building, is accelerated downward by gravity. | | Reasoning  Ã‚  The upward direction is chosen as the positive direction. The initial  velocity  v0  of the stone is zero, because the stone is dropped from rest. The  acceleration  due to gravity is negative, since it points downward in the negative direction. Solution | 2). After 3. 00 s of free-fall, what is the  velocity  v  of the stone? Solution 1).A football game customarily begins with a coin toss to determine who kicks off. The referee tosses the coin up with an initial  speed  of 5. 00 m/s. In the absence of air resistance, how high does the coin go above its point of release? Reasoning  Ã‚  The coin is given an upward initial velocity. But the  acceleration  due to gravity points downward. Since the  velocity  and acceleration point in opposite directions, the coin slows down as it moves upward. Eventually, the velocity of the coin becomes  v=0 m/s at the highest point. | At the start of a football game, a referee tosses a coin upward with an initial velocity of  v0=+5. 0 m/s. The velocity of the coin is momentarily zero when the coin reaches its maximum height. | Solution| 2). What is the total time the coin is in the air before returning to its release point? Reasoning  Ã‚  During the time the coin travels upward, gravity causes its  speed  to decrease to zero. On the way down, however, gravity causes the coin to regain the lost speed. Thus, the time for the coin to go up is equal to the time for it to come down. In other words, the total travel time is twice the time for the upward motion. With these data, we can use Equation   (v=v0+at) to find the upward travel time. Solution

Longboarding

Cameron Campbell English 1010 October 25, 2012 â€Å"Longboarding† Grippy and maneuverable, longboards are safer for street surfin’ and they can give you the most bang for your skateboard buying buck. Many people in this country associate skateboarding with ollies, grinds, and other tricks made famous by icons of the sport such as Tony Hawk. However, there is an entirely different way to utilize a board with wheels attached to it which doesn’t involve any hopping or flipping, just riding it. Longboards are wonderful for those who enjoy being outside and schussing down a smoothly paved hill.Longboarding matches similar feelings and maneuvers associated with surfing and snowboarding. Instead of relying on the ocean or a snowy mountain, most people can find a decent patch of pavement for some exhilarating laid-back fun. Young people around the country purchase longboards for purposes that symmetrical skateboards struggle to perform, such as transportation over long distances and achieving sharper turns. The shape of these boards, their elevation from the ground, and their rubber wheels allow much smoother, faster riding than the characteristics of normal skateboards.Not only is the act of riding a longboard much different than that of a common skateboard, but there is also an entirely different culture for the sport. Instead of starting from scratch, trying to learn tricks that may intimidate new skateboarders, all a budding longboarder needs to succeed is balance and a little confidence. The popularity of longboarding is largely attributed to how fun it is. The rush of cruising at high velocities coupled with the friendly, carefree culture that boarders have established help make longboarding a timeless sport.

Illiegal Immigration Research Paper Example | Topics and Well Written Essays - 1750 words

Illiegal Immigration - Research Paper Example A most recent example involves the spirited efforts by a section of pressure groups to prevent a bill meant to give more room to law enforcement agents for searching persons suspected to be illegal immigrants. Discussion The usual trend in the United States has been that competing perspectives and opinions between those expressly opposed to structural safeguards and those who advocate for more determined steps of addressing the matter (Bascio and Patrick 122) determine the subject of illegal immigrants. Estimates from various sources place the number of illegal immigrants in the United States between 10 to 12 million (Kenney and Kwao 50). This numbers has kept fluctuating over the years in response to certain forces that derive from social or economic stimuli. Chain migration is one of the most visible aspects of illegal migrations in the U.S. Chain migration occurs where illegal immigrants attract relatives, friends, or associates from their countries of origin to join them once the y have settled in the states. Efforts to contain illegal immigration have often been caught up in differences conditioned by political competition, private interests, and lobby pressure (Kenney and Kwao 50). ... The healthcare system is one of the institutions that are considered the worst hit by the effects of illegal immigrants. Parties proposing tough approaches on the question of illegal immigrants argue that the groups have imposed significant pressure on the limited healthcare resources. Illegal immigrants are accused of causing significant imbalances between the available healthcare resources and the demand (Ngai 68). As a consequence of this reality, these parties argue that the cost of healthcare has risen due to the gap that is created by the mismatch between supply and demand. It would be important to consider the subject of illegal immigration in light of some of the issues that attend to their impact on the political scale. Hispanic voters are some of the most influential voting blocs in the United States. They comprise some of the significant swing votes in the United States. It is precisely because of this reason that political parties tend to approach the question of illegal immigration with utmost caution. Past trends and analyses have shown a growing preference by immigrant populations to Democrats. Studies have shown that immigrants find the Democrats’ policies more conducive and tolerant to their situations than the Republicans. A survey conducted on the Hispanic voters showed that the Democrats enjoyed nearly two thirds of the Hispanic votes while the Republicans only attracted less than 20 percent of the vote (Ngai 68). These results indicate that the voting process among the groups is highly determined by matters of convenience. The immigrant groups have tended to show a determined support to policies and discourses